Soudabond Easy is a fast curing, ready to use, one component, PU adhesive.

• Integrated gun system
• Reusable
• Easy application
• Time & money saving
• Excellent adhesion to almost all substrates
• Fast cure
• High initial grip
• Even adheres to moist surfaces

20 oz. aerosol can Genius Gun

Polyurethane Adhesive

Moisture Cure, One Component

One Can Replaces up to 10 (24oz gun)/ 7.5 (20oz

Genius) Quart Tubes of Solvent Based Adhesive

One Can Covers up to 140ft 2 (24oz Gun)/ 105ft 2

(20oz Genius) of Insulation Boards

Base

Consistency

Curing system

Curing speed (*)

Skin formation (*)

Can be trimmed (*)

Full strength (*)

Post expansion

Thermal conductivity (DIN 52612)

Tensile strength

Shear strength

Temperature resistance

UL 723 (ASTM E 84) Fire test

Single component polyurethane

Stable adhesive foam (does not sag)

Moisture cure at room temperature

About 30 minutes -1.2-inch adhesive bead

About 8 minutes – 1.2-inch adhesive bead

About 50 minutes -1.2-inch adhesive bead

About 12 hours – 1.2-inch adhesive bead

Minimal

About 0.035 W/(mK)

27.6 lb./in 2

20.6 lb. /in 2

-40F to +194F when cured/ +248 F (up to max. 1 hour)

Flame Spread 15, Smoke Developed 35

(*) Measured at 68 F / 65 % R.H. These values may vary depending on ambient factors such as temperature, humidity and type of substrate.

Limitations:

Excellent adhesion on most substrates, except for PTFE, PE and PP.

Always store can with the valve pointed upwards.

Cured PU foam must be protected from UV radiation.

Lower temperature and humidity will extend curing time.

Excellent Adhesion to Most Building Materials

Even Sticks to Moist Surfaces

High Initial Grip (Green Strength)

Great Thermal & Acoustical Insulation

Cost-saving (Time & Labor)

Solvent Free

CFC-free Propellants, Harmless to Ozone Layer