SikaTile-890 Revive is a ready-to-use, low-cost way to give tiles a new look without replacing the tile or re-grouting.

With its easy-to-use urethane acrylic formula, a long-lasting stain is attained to rejuvenate and seal sanded and unsanded grout joints. It provides a natural, uniform color that is highly resistant to stain, wear, sunlight, water, and extreme temperatures.

Key Features

• Change or renew the color of grout
• Seals and protects the grout from stains and moisture
• Extremely durable
• Water-based, ready-to-use, and easy to apply and clean
• Suitable for both interior and exterior use
• Available in all SikaTile grout colors

Usage

SikaTile-890 Revive can be used to rejuvenate old grout in both interior and exterior applications on horizontal and vertical grout joints.

Packaging

8 oz. (237 mL) bottle; 12 bottles per case

Color Options

Available in 18 colors. Refer to the SikaTile grout kit or color card for actual colors.

Environmental Information

Sika is committed to environmental responsibility in both products produced and manufacturing practices. The use of this product can contribute towards LEED v4.1 certification:

• IEQ Credit 4.1, Low-Emitting Materials Adhesives & Sealants

Technical Specifications

Chemical Base Urethane modified acrylic latex, fine fillers, and colored pigments Shelf Life 15 months from the date of production when stored in the original, sealed package Storage Conditions Store in undamaged, original, sealed package, in dry conditions at 73F (23C)

Coverage

Tile Size Approximate Coverage* 4 x 4 Tile with Joint (100 x 100 x 6 mm) 100 sq.ft. (9.3 m) 12 x 12 Tile with Joint (300 x 300 x 6 mm) 150 sq.ft. (13.9 m) 18 x 18 Tile with Joint (450 x 450 x 6 mm) 250 sq.ft. (23.2 m)

*Coverage shown is for estimating purposes only. Actual coverage may vary due to installation techniques, tile types, sizes, porosity of grout, and waste.

Application Instructions

Read and follow the manufacturers instructions before installation. Rubber gloves and proper eyewear are recommended. SHAKE WELL BEFORE USING.

Test the grout joint for previously applied sealers by applying a few drops of water. If water beads, a sealer is present and must be removed before application. Conduct a small test area to ensure desired results, and allow a minimum of 2 hours cure time.

For new grout installations, allow at least 7 days curing time before staining. Apply thin, even coats using a bristle or sponge brush, and allow the stain to dry for 20-30 minutes. After drying, dampen the area with water and remove excess stain from the tile surface using a white nylon scrub pad.

For dark to light color changes, 2 or more coats may be necessary. Allow 2 hours drying time between coats. The surface is ready for traffic in 24 hours, but avoid direct scrubbing on grout joints for 21 days to ensure maximum durability.

Cleaning Tools

Clean applicator tools with water after each use. Dispose of empty bottles according to state and local regulations. Store unused portions in a cool, dry place.

Documents

• Product Data Sheet (PDS) – 813 KB (EN)
• SikaTile Grout Color Chart – 4 MB (EN)
• SikaTile Brochure – 8 MB (EN)
• Safety Data Sheet (SDS) – 161 KB (EN)
• Safety Data Sheet (SDS) – 165 KB (ES)
• Fact Sheet – 2 MB (EN)