EPOXY INJECTION ADHESIVE ANCHORING SYSTEM

The Pure50+ is a two-component adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. Pure50+ epoxy is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in solid concrete base materials. It can also be considered for bonding together cured concrete and masonry materials together as well as filling large cracks and abandoned holes.

FEATURES & SPECS

FEATURES

• Designed for use with threaded rod and reinforcing bar hardware elements
• Evaluated and recognized for freeze/thaw performance
• Cartridge design allows for multiple uses using extra mixing nozzles
• Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
• Evaluated and recognized for long term and short term loading (see performance tables)
• Oversized hammer-drilled holes in concrete, for short term loading only (see www.DEWALT.com)

SPECIFICATIONS

GENERAL APPLICATION & USES

APPLICATIONS

• Bonding and anchoring threaded rod and reinforcing bar into hardened concrete
• Evaluated for installation and use in dry and wet holes, including water-filled holes
• Can be installed in a wide range of base material temperatures with good working times
• Cracked and uncracked concrete conditions as well as seismic and wind loading (SDC A – F)

APPROVALS & LISTINGS

APPROVALS

• International Code Council, Evaluation Service (ICC-ES) ESR-3576 for cracked and uncracked concrete
• Code Compliant with the 2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC and 2012 IBC/IRC
• Tested in accordance with ACI 355.4/ASTM E488, and ICC-ES AC308 for use in structural concrete with designs according to ACI 318 (-19 & -14) Chapter 17 and ACI 318 Appendix D
• Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
• Florida Building Code, FBC Supplement including HVHZ (within ESR-3576)
• Compliant with NSF/ANSI/CAN Standard 61 for drinking water system components – health effects
• Also classified as lead free in accordance with NSF/ANSI/CAN 372
• Compliant with California DPH for VOC emissions and South Coast AQMD for VOC content (LEED v4.1)
• Conforms to requirements of ASTM C881 including C882 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes B & C (also meets Type III except for elongation)
• Department of Transportation listings – see www.DEWALT.com or contact transportation agency