STAINLESS STEEL WEDGE EXPANSION ANCHOR

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials incThe Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium

FEATURES & SPECS

FEATURES

• Consistent performance in high and low strength concrete
• Nominal drill bit size is the same as the anchor diameter
• Anchor can be installed through standard fixture holes
• Length ID code and identifying marking stamped on head of each anchor
• Anchor design allows for follow-up expansion after setting under tensile loading

GENERAL APPLICATION & USES

APPLICATIONS

• Structural connections, i.e., beam and column anchorage
• Safety-related attachments
• Barriers and guards
• Fencing and railing
• Mezzanines and racking
• Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
• Trapeze / overhead utilities
• Ledgers, angles and brackets
• Equipment anchorage
• Seismic and wind loading (SDC A – F)

APPROVALS & LISTINGS

APPROVALS

• International Code Council, Evaluation Service (ICC-ES), ESR-2818 for cracked and uncracked concrete
• International Code Council, Evaluation Service (ICC-ES), ESR-2966 for masonry
• Code compliant with the 2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC, and 2012 IBC/IRC
• Tested in accordance with ACI 355.2/ASTM E488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318 (-19 or -14) Chapter 17 or ACI 318 Appendix D
• Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (anchor Category 1)
• Tested in accordance with ASTM E488 and ICC-ES AC01 for use in masonry
• City of Los Angeles, LABC and LARC Supplement (within ESR-2818 and ESR-2966)
• Florida Building Code, FBC Supplement including HVHZ (within ESR-2818 and ESR-2966)
• Underwriters Laboratories (UL Listed) – File No. EX1289, see listing for sizes
• FM Approvals (Factory Mutual) see FM Approval Guide for sizes