Protects exterior surfaces and grout joints from water and humidity.

• Creates a water repellent, breathable barrier.
• Prevents wear caused by weather damage.
• Guards the surface against moss, mold and efflorescence.
• Ideal for brick veneers and concrete.

Features & Specifications

• DOES NOT ALTER THE MATERIALS NATURAL FINISH.
• OFFERS LONG LASTING, RENEWABLE PROTECTION.
• PROVIDES VERY HIGH COVERAGE RATES.
• DOES NOT YELLOW OVER TIME.

IDEAL FOR
ALL UNPOLISHED NATURAL STONE, CONCRETE

HOW TO USE IT

Ready to use, no dilution necessary.On a clean, dry surface apply an even, generous coat ofHYDROREPwith a brush, roller or airless sprayer.

Apply the product until the surface is fully saturated, then wait 8 hours.
A second coat may be necessary, depending on the absorbency of the material. On dense natural stone apply only one coat. For concrete and porous natural stone, two coats are needed. The surface may be used for normal foot traffic after 8 hours. Full cure and maximum sealer protection is achieved in 24 hours. To provide an oil repellent barrier on exterior surfaces, apply a finishing coat ofFOBafter 8 hours.

COVERAGE

1 Liter (1.06 QT)

• Natural stone 215 sq. ft. (20 m2)
• Concrete 54-107 sq. ft. (5-10 m2)
• Coverage rates are indicative and per coat.

PLEASE NOTE:Before application, testHYDROREPon a small, inconspicuous area of the surface or loose sample to check for any changes in color. Do not apply the product outdoors if rain is in the forecast.

Literature & Links

Technical Sheet

Safety Sheet