Gator Skin is an inorganic silicone penetrating protectant. Its inorganic silicone chemistry means that it is not broken down by natural elements. Gallon size call for larger size

By deeply penetrating into the substrate, it offers years of internal protection. Its breathable nature means it will not trap moisture and will prevent water penetration into the substrate protecting it from weather.

Product Directions

Before You Begin:Surfaces must be clean, dry and free of any contaminants before sealing. Gator Skin Repellent performance is directly related to how thoroughly the surfaced is prepared. All grease, oil and potential contaminate must be removed. Do not apply when the temperature of the air or the surface to be coated is below 50F. Testing on your surface is always recommended to ensure desired results.

Surface Preparation:Concrete should cure a minimum of 28 days before sealing. Read label instructions carefully. Cobble Clean, Cobble Prep and Cobble Oxhide may be used for specific cleaning situations.

Mixing Instructions:Stir product

Application:Apply with a lambs wool or microfiber cloth, working the material into the surface.

Airless Sprayer:Spray by overlapping each pass. Always apply in an even film deposit and maintain a working wet line. Remove any excess material after 3-5 minutes.

On Bare Surface:Apply to the surface and allow to penetrate for 3-5 minutes, remove any excess. Do not allow any excess or pooling to dry on the surface.

Over Previously Sealed:Film forming sealers will need to be stripped prior to application. Gator Skin Repel-lent may be applied over non film forming sealers provided the prior application is sufficiently worn away.

Features

• Easy to apply
• Breathable
• Keeps natural appearance
• Inorganic
• Protects the substrate by deeply penetrating

Applications

• Use Gator Skin on any porous material that needs protections for the elements such as:
• Natural Stone
• Bricks
• Wood
• Concrete

Gator Skin Technical Data