Cat 1000 Expert Abrasive Materials such as asphalt, green concrete, abrasive stone, soft stone, and blocks

Cat Asphalt / Abrasive blades are designed for intensive use across the 3 performance grades: Good, Better and Best. Each individual product has specifically designed segments shape and geometry which complements the diamond grit and bond formulation that is proved to enhance the cutting performance in terms of fluidity and smoothness of cut, speed and blade life. Cat Asphalt / Abrasive blades are able to cut all types of asphalt and abrasive materials. Each increase in performance rating increases the performance in terms of speed and life by use of higher diamond quality and diamond concentration, bond formulation and segment height. All blades have special undercut protection segments for clearing debris from the cut alleviating undercutting of the segments.

ATTRIBUTES

• Ultra-High Diamond Concentration & Diamond Quality
• Undercut Protection Segments to Clear Debris
• Fully Hardened & Heat-Treated Steel Core
• Ultra Long Life & Speed of Cut, Widest Application Span
• Ultimate Diamond Quality & Bond Formulation
• 2X Laser Welded for Safety & Stability of Segments
• Keyhole Gullet Design for Dust Extraction from Cut

APPLICATION

–Asphalt, Concrete Block Under 15N/Mm, Thermal Block 7 N/Mm, Green Concrete Universal, Green Concrete With Very Hard Aggregate, Green Concrete With Medium Hard Aggregate.

-Lignacite Blocks, Lava Rock, Pumice

-Asphalt Over Concrete

-Soft Facing Bricks

KEY

–Correct Bond For Application Optimal Performance, Speed & Life

-Good Match Bond For Application Excellent Performance Speed & Life

-Acceptable Bond For Application Reduced Performance, Speed & Life

-Occasional Use Only – Much Reduced Performance, Speed & Short Life – Glazing & Premature Wear Will Occur

PRODUCT TYPE DIAMETER SEGMENT HEIGHT SEGMENT WIDTH MAIN ARBOR – BORE REDUCING RINGS INCLUDED MACHINES USED
SEE KEY PART NO CODE NO MM INCH MM INCH MM INCH MM INCH MM INCH DA35622U USAAM801215 300 12 15 0.591 3.175 0.125 25.4+P 1+P 20MM 0.78 DA35623U USAAM801415 350 14 15 0.591 3.175 0.125 25.4+P 1+P 20MM 0.78 DA35624U USAAM801615 400 16 15 0.591 3.175 0.125 25.4+P 1+P 20MM 0.78 DA35625U USAAM801815 450 18 15 0.591 3.175 0.125 25.4+P 1+P 20MM 0.78

Available in USA, non-oSa accredited.