Eliminates cement grout haze, efflorescence, lime deposits and hard water stains. Great for a final clean after installing tile. Can you useMP90 Eco Plus to seal and protect after installation.Removes soap scum, rust stains, paint and construction dirt.Use
HOW TO USE IT
Post installation cleaning:Wet the surface and grout joints with water, then useDETERDEKdiluted 1:5 (1 QT of product in 5 QT of water).
Apply the solution to sections of a few square feet at a time.
Let sit 5-10 minutes, then rub vigorously with an abrasive pad or large brush.Remove the residue with a cloth or wet vac and rinse with plenty of water.Should any stubborn dirt remain, repeat the application with a more concentrated solution.Outdoor cleaning:On surfaces with outdoor contaminants (smog, dust, etc.), dilute 1:10 (1 QT of product in 2.5 GAL of water).Then follow the application instructions above.
COVERAGE
(1 GAL – 3.78 L)
Do not use on acid sensitive stone such as marble, limestone, or travertine. Test the product on a small, inconspicuous area of the surface or loose sample prior to full application.
Technical Sheet
Safety Sheet
Reviews
There are no reviews yet.