MB-20 Granite Polish is a proprietary blend of abrasives and polishing agents designed to deliver a high-quality polish for granite, mercantile granite, and serpentines.

This industry-leading formula provides professional results with ease.

Available Sizes:

• 8.5 oz. Covers approximately 200 sq. ft.
• 2.2 lbs. Covers approximately 400-800 sq. ft. (Coverage increases as the pad becomes saturated)
• Also available in case quantities. Call +1 (800) 342-3876 for pricing.

Important Notes:

• Mask off and protect surrounding surfaces from splatter.
• Wear safety glasses and gloves.
• Ensure the surface is free of coatings, waxes, sealers, grease, and soil.
• If honing is required, use high-quality diamonds and hone to at least 1000 grit or higher, depending on the stones clarity.

Directions for Use:

Countertops:

1. Use a variable-speed right-angle polisher with a 5 or 7-inch pad driver and a hogs hair pad (set speed to 3 or midway).
2. Target a 2 sq. ft. area and place 1 teaspoon of product in the center.
3. Position the machine directly over the product and spread it slowly while applying pressure.
4. As the product dries, increase speed and decrease pressure.
5. Once nearly dry, run the machine at max speed while moving it swiftly over the area.
6. If swirls or marks appear, it may indicate too much product was used. Remove them with a white pad and a mist of water or a polishing compound like tin oxide.

Floors:

1. Target an 8-10 sq. ft. area and place 2 tablespoons of product in the center.
2. Lightly mist with water to form a semi-thick slurry.
3. Use a floor machine (1.5+ HP, 135 lbs) with a hogs hair pad and spread the product evenly.
4. Work the slurry until it dries and the stone achieves a shine.
5. At every 200 sq. ft., flip or change the pad as needed.
6. If using a lighter machine, a wet polishing method may be required to prevent bogging down or tripping the breaker.

These directions serve as a baseline. Different stones may require adjustments. If in doubt, contact us at +1 (800) 342-3876.