MB-12 Caliber Polishing Powder is an exceptional polishing compound designed to deliver a wet-to-dry polishing process, producing a stunning high-gloss finishoften exceeding factory-level shine.

Ideal for marble, limestone, travertine, serpentine (green marble), onyx, ophicalcite, terrazzo, and more, MB-12 also doubles as a powerful cleaning agent and coating/sealer remover for granite surfaces.

Key Features:

• High-Gloss Finish:Achieves a brilliant shine, often surpassing the original factory finish.
• Versatile Use:Suitable for a wide range of natural stones and terrazzo.
• Cleaning & Coating Removal:Effectively cleans and removes coatings or sealers from granite.
• Professional Results:Designed for professional use to deliver unmatched polish and clarity.

Available Sizes:1 lb, 2 lb, 8 lb, and 25 lb (packed by weight, not volume).

Coverage:Approximately 5001,000 sq ft per pound, depending on the stone type.

How to Use:

Preparation:

1. Complete the honing process to achieve the highest clarity possible for optimal results.
2. Mask or protect surrounding surfaces to prevent damage from splatters.

For Countertops:

1. Target an area of 23 sq ft. Sprinkle teaspoon of MB-12 in a circular pattern slightly smaller than the polishing pad.
2. Add water using a spray bottle to soak the powder and create a slurry.
3. Use a white polishing pad with a variable-speed right-angle grinder/polisher set to low speed.
4. Spread the slurry over the area, applying pressure until the mixture is almost dry.
5. Increase speed, lighten pressure, and buff to a shine. Remove streaks with a clean, dry white pad and a mist of water.

For Floors:

1. Target an area of 1012 sq ft. Sprinkle 1 tablespoon of MB-12 in the center of the area.
2. Add water to create a slurry.
3. Use a hogs hair pad with a floor machine (1.5 hp, max 175 RPM) to spread the slurry evenly.
4. Polish in a spiral motion until the slurry dries and the surface shines.
5. Flip or rinse the pad after approximately 100 sq ft to maintain performance. Remove streaks with a clean, dry hogs hair pad and a mist of water.

Important Notes:

• Professional Use Only:MB-12 requires skill and experience for optimal results.
• Adjust Techniques:Different stones may require variations in powder quantity, water, speed, and pressure.
• Safety First:Always refer to the Safety Data Sheet (SDS) before use.

Why Choose MB-12 Caliber Polishing Powder?
MB-12 is the ultimate choice for professionals seeking to restore and enhance the natural beauty of stone surfaces. Its ability to deliver a high-gloss finish, clean surfaces, and remove coatings makes it an indispensable tool for achieving flawless results.

Transform your stone surfaces with MB-12 Caliber Polishing Powder and experience the brilliance of a professional-grade finish!