Vulkem Primer #171 is a quick-drying, one-part, moisture-curing primer.

It enhances adhesion to concrete, plywood and other porous substrates where Vulkem urethane sealants, membranes or coatings will be applied.

NOT for use in Canada.

Basic Uses

• Porous surfaces, urethane sealants, Vulkem Coating Systems and TREMproof membranes.
• Quick-drying, one-part, moisture-curing primer.
• It is used as an adhesion promoter for Vulkem brand urethane sealants and coatings and TREMproof membranes on porous surfaces such as concrete and wood.
• Apply generously with a clean brush or roller. Do not apply in excess where it will puddle or pond. At 70 F (21C), allow 30 to 45 min for primer to become tacky before applying sealant, coating or membrane.
• Do not allow primer to dry completely. Do not apply sealant or coating if primer becomes hard or glossy.
• If it does, clean with a Tremco approved solvent and coat with Vulkem 191 Primer.

Data Sheets

• Primer Selection Usage Guide
• Vulkem #171 Data Sheet

SDS

• Vulkem Primer #171 SDS
• Vulkem Primer #171 SDS (CAN)