Hand Carry Air Compressors

Model FC2002 features a classic stack-tank design combined with a low-amp draw, 2 HP motor for high output and consistent production. 4.1 CFM @ 90 PSI. Motor features also include manual-overload protection for longer life and ball bearings for great durability. Oversized crankcase helps hold oil viscosity longer and protects pump on unlevel surfaces.

ABOUT THE PUMP

• ROLAIR Quality
• Single Stage
• Ball Bearings
• Cast-Iron Cylinder
• Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life

ABOUT THE MOTOR

• 2 HP
• 3400 RPM
• S-1 Rated for Continuous Duty
• Low-Amp Draw
• Overload Protection with Manual Reset
• 115 Volt
• 60 Hz
• Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability

STANDARD EQUIPMENT

• 100% Duty-Cycle Motor
• Pressure Switch with On/Off Lever
• Regulator with Air Line Pressure Gauge
• 12 oz. Crankcase Pre-filled with Oil
• 95/125 PSI Operating Pressure
• Factory Tested
• Safety Relief Valve

SPECIFICATIONS

HORSE POWER 2 HP CFM DISPLACED 8.7 CFM CFM DELIVERED 4.1 CFM @ 90 PSI PUMP/MOTOR RPM 3400 RPM OVERLOAD PROTECTION Yes (Manual Reset Standard) LUBRICATION TYPE Splash Lubrication PUMP OIL CAPACITY 12 oz. REED VALVE SYSTEM Yes (Standard) NUMBER OF CYLINDERS 1 TANK CAPACITY 4.3 Gallons L X W X H 20″x15″x17″ DECIBEL RATING 79 dBA COUNTRY OF ORIGIN Compressor Origin.pdf SHIPPING WEIGHT 62 lb. SHIPPING DIMENSIONS (L X W X H) 22″ x 16″ x 18″

DOCUMENTS

FC2002 Schematic

FC2002 Showroom Sheet

FC2002 Owner’s Manual