2W VHF/UHF Analog Portable Radios – NX-1202AV/1302AU for professional communication you can rely on.

Analog – FM

• FM Conventional Operation
• FleetSync: PTT ID, Stun/Revive,Talk back, Selcall
• MDC1200: PTT ID, Radio Inhibit/Uninhibit, Radio check, Emergency
• QT / DQT, DTMF, 2-tone
• Built-in Programmable Voice Inversion
• Scrambler (per channel)
• Built-in Compander (per channel)

Digital NXDN Mode (Optional License required)

• FDMA Very narrow 6.25 kHz & narrow 12.5 kHz bandwidths
• NXDN Conventional Operation
• Site Roaming
• Digital / Analog Mixed mode
• Group / Individual Call
• Status / Short data, Paging Call
• Remote Stun / Kill, Monitor, Check & Control
• Digital Bit Scrambler
• Late Entry
• Over-the-Air Alias (OAA)

Digital DMR Mode (Optional License required)

• TDMA 2-slot 12.5 kHz bandwidth equivalent to 6.25 kHz very narrow bandwidth
• DMR Tier II Conventional Operation
• Site Roaming
• DMR Auto Slot Select
• Dual Slot Direct Mode
• Digital / Analog Mixed mode
• Call Interruption
• Group / Individual Call
• Status / Short data, Paging Call
• Remote Stun / Kill, Monitor, Check & Control
• Enhanced Encryption (ARC4)
• Digital Bit Scrambler
• Late Entry
• Over-the-Air Alias (OAA)

Features

• RF output power 2W both on VHF/UHF
• Large 7-Color LED indicator on the top panel
• Selective Power-on LED
• Selective Call Alert LED
• Battery Level Indication
• Multi-status function indication
• Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable
• digital processor
• Audio Equalizer: Flat, High, Low
• Auto Gain Control: On, High, Low, Off
• Noise Suppressor
• Microphone type settings
• Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi,
• Normal Scan
• VOX & PTT triggered Semi- VOX, Voice-operated TX
• Emergency Function: Customizable Emergency Profile
• Lone Worker
• Max / Min Volume setting & Volume control
• Voice Announcement
• Remote Stun / Kill / Check
• Electronic Serial Number (ESN)
• MIL-STD-810 C/D/E/F/G
• IP54 and IP55
• Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM
• analog protocols (Optional License required)

SPECIFICATIONS

General NX-1202AV NX-1303AU Pre-set Frequencies Type 1 136-174 MHz 450-520 MHz Max. Channels per Radio 64 Number of Zones 4 Max. Channels per Zone 16 Channel Spacing Analog 30*1 / 25*1 / 15 / 12.5 kHz Digital 12.5 / 6.25 kHz Power Supply 7.5 VDC 20 % Battery Life DMR Analog/NXDN KNB-45L (2000mAh) Approx. 18 hours Approx. 15 hours KNB-69L (2550mAh) Approx. 23.5 hours Approx. 19.5 hours Operating Temperature(Radio only)*2 -22F to +140F (-30C to +60C) Frequency Stability (-30 to +60C; +25C Ref.) 0.5 ppm Antenna Impedance 50 Dimensions (W x H x D) Projections Not Included Radio with KNB-45L 2.13 x 4.84 x 1.32 in (54 x 123 x 33.5 mm) Radio with KNB-69L 2.13 x 4.84 x 1.48 in (54 x 123 x 37.5 mm) Weight (Basic model) (Standard keypad model) Radio Only 5.64 oz (160 g) Radio with KNB-45L 9.88 oz (280 g) Radio with KNB-69L 10.41 oz (295 g) FCC ID Type 1 K44501000 K44501101 IC Certification 282F-501000 282F-501100 Receiver NX-1202AV NX-1302AU Sensitivity NXDN @ 6.25 kHz Digital (3% BER) 0.18 V NXDN @ 12.5 kHz Digital (3% BER) 0.22 V DMR @ 12.5 kHz Digital (1% BER) 0.25 V DMR @ 12.5 kHz Digital (5% BER) 0.18 V Analog @ 12.5/25 kHz (12 dB SINAD) 0.20 V / 0.24 V Selectivity Analog @ 12.5 / 25 kHz 68 dB / 74 dB Intermodulation Distortion 70 dB Spurious Rejection 70 dB Audio Distortion 7% Audio Output Power 1 W / 12 (Internal Output) Transmitter NX-1202AV NX-1302AU RF Power Output (High / Low) 2W / 1W Spurious Emission -70 dB FM Hum & Noise Analog @ 12.5 / 25 kHz 40 dB / 45 dB Audio Distortion 2% DMR Digital Protocol ETSI TS 102 361-1, -2, -3 Emission Designator 16K0F3E, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D, 7K60FXD, 7K60FXE

*1 25 / 30 kHz in VHF/UHF Bands excluding T-Band are not included in the models sold in the USA or US territories.
*2 Operating temperature specification for a Li-ion battery is -10C to +60C [14F to +140F].Analog measurements made per TIA603. Specifications are measured according to applicable standards.Specifications are subject change without notice, due to advancements in technology.

FleetSync is a registered trademark of JVCKENWOOD Corporation in the United States and/or other countries.NXDN is a trademark of JVCKENWOOD Corporation and Icom Inc.NEXEDGE is a registered trademark of JVCKENWOOD Corporation.All other trademarks are the property of their respective holders.

MIL-STD & IP

MIL Standard MIL 810C Methods/Procedures MIL 810D Methods/Procedures MIL 810E Methods/Procedures MIL 810F Methods/Procedures MIL 810G Methods/Procedures Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I Solar Radiation 505.1/Procedure 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I Rain* 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Prcedure II Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5 Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV International Protection Standard Dust & Water Protection* IP54/55* To meet IP54/55, the 2-pin connector cover has to be connected on the radio or the locking bracket has to be attached to the external speaker microphone.