All Service Jacket+ (ASJ+) tape for sealing butt joints on ductboard and pipe insulation wrapped with ASJ+ faced backing.

Linered and tested in accordance with UL 723, AF 995CT is constructed with a white poly-scrim-foil backing that inhibits mold growth and is DECA free, in addition to an all-weather acrylic adhesive that performs in temperatures ranging from -20 F to 260 F to deliver a permanent solution for use across a range of jobs.

Features & Applications

All Service Jacket+ (ASJ+) tape Linered Superior stability during extreme fluctuations in temperatureTear-resistant backing that matches white duct and pipe insulation

Markets

Construction

Backing: White Kraft Paper/Scrim/Foil (ASJ+) DECA Free

Adhesive: Cold temperature, white acrylic-based adhesive

Liner: Non-contaminating, siliconized, flat, white, paper release liner

Properties & Technical Data

Product Nomenclature: AF 995

Property Standard Metric Adhesion to Stainless Steel 80 oz/in width 8.76 N/10 mm Elongation 6.70% 6.70% Service Temperature Range -20 F to 260 F -29 C to 127 C Tensile 50 lbs/in width 87.6 N/10 mm Thickness – With Liner 12.6 mils 0.32 mm Thickness – Without Liner 8.3 mils 0.21 mm

Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the users method of application before use.

Downloads

Downloads

Technical Data Sheet
Safety Data Sheet

Sizes & Colors

Colors Available:

Lengths Available: 50 yd

Widths Available: 2.83 in

Sizes and colors disclaimer: Lead times may apply. Please contact Shurtape customer service for information related to stock and non-stock sizes and colors.

Storage & Usage Conditions

Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.

Applicable Standards

Tested in accordance with UL 723