Bonastre Stone Soap is an after polishing rinse for Marble, Travertine, Limestone, Granite, Cement Terrazzo and Concrete.

It’s a concentrated non acidic rinse used after the final polish on a stone. Stone Soap helps by removing polishing residues caused by polishing powders or mechanical polishing, leaving the surface residue and haze free as well as water proof.

Directions for Use.

Dilute 2 oz per gallon of water and use at the last mechanical step or after finishing polishing with a powder. If using after polishing with a powder, scrub the floor with a withe pad and run over the surface for 3 minutes and vacuum all liquid from the surface with a wet / dry vacuum.

5 liters pail / 1.32 gal