FXA60A4 High-Cycle Concrete Vibrator

2.375″ head, 13.1′ hose, 33′ cord, 180 Hz cycleHigh-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.

• Powered by a 4.5-amp electric motor
• Permanently lubricated oversized head bearings for unmatched durability
• Hose can be extended to 45 (13.5 meters)
• Waterproof control box
• Optional 50- and 100-foot (15, 30 meters) extension cords available
• Requires high-cycle generator GDP5H