Eliminate Vertical Surface Damage by using the No-Spin Edger
Product Highlights
- Rigid refinishing backer with built-in vertical surface protection
- Achieve fast and precise cut patterns against edges
- Easy way to eliminate vertical surface damage
- Faster and easier than traditional backer pads
- Reduces time, labor, and fatigue
The patented No-Spin Edger is an inexpensive solution for eliminating vertical surface damage during polishing and refinishing. This highly durable, rigid aluminum backer replaces traditional backer pads, and features a free-floating top disk with a built-in bumper that stops spinning while the polishing pad continues to work beneath it. This innovative system acts as a protective roller-guide against perpendicular surfaces, and eliminates costly damage caused by the edge of spinning pads. The No-Spin Edger allows fast, precise, and consistent cut patterns along edges and in corners, while greatly reducing time, labor, and worker fatigue.
HIGHLIGHTS
- Rigid refinishing backer with built-in vertical surface protection
- Achieve fast and precise cut patterns against edges
- Easy way to eliminate vertical surface damage
- Faster and easier than traditional backer pads
- Reduces time, labor, and fatigue
- Available in three sizes (4″, 5″, and 7″) with either 5/8-11 standard threads or M14 metric threads for a variety of applications
PATENT US8740669
ACCESSORIES
- 4″ Low-Profile Bumper (part # 4139-LPB) The Low-Profile Bumper accessory for the No-Spin Edger protects faucet fixtures and other lower-profile vertical surfaces from the edge of spinning pads during polishing or refinishing.
| General Specifications |
| Materials |
Aluminum, stainless steel bearing, rubber, hook-and-loop fastener |
| Product Weight |
0.7 lb |
| Package Dimensions |
7″ x 7″ x 2″ |
| Shipping Weight |
1.0 lb |
| 4″ No-Spin Edger (5/8-11 Standard) |
| Part # |
4139-NSE-17 |
| Includes |
One 4″ rigid aluminum backer with bearing disk and rubber bumper; standard threads |
| Product Dimensions |
4.15″ outside diameter, 0.75″ thick, 5/8-11 standard female threads |
| 4″ No-Spin Edger (M14 Metric) |
| Part # |
4139-NSEM-17 |
| Includes |
One 4″ rigid aluminum backer with bearing disk and rubber bumper; metric threads |
| Product Dimensions |
4.15″ outside diameter, 0.75″ thick, M14 x 2.0 metric female threads |
| General Specifications |
| Materials |
Aluminum, stainless steel bearing, rubber, hook-and-loop fastener |
| Product Weight |
0.9 lb |
| Package Dimensions |
7″ x 7″ x 2″ |
| Shipping Weight |
2.0 lb |
| 5″ No-Spin Edger (5/8-11 Standard) |
| Part # |
5139-NSE-17 |
| Includes |
One 5″ rigid aluminum backer with bearing disk and rubber bumper; standard threads |
| Product Dimensions |
5.15″ outside diameter, 0.75″ thick, 5/8-11 standard female threads |
| 5″ No-Spin Edger (M14 Metric) |
| Part # |
5139-NSEM-17 |
| Includes |
One 5″ rigid aluminum backer with bearing disk and rubber bumper; metric threads |
| Product Dimensions |
5.15″ outside diameter, 0.75″ thick, M14 x 2.0 metric female threads |
| General Specifications |
| Materials |
Aluminum, stainless steel bearing, rubber, hook-and-loop fastener |
| Product Weight |
1.5 lb |
| Package Dimensions |
10″ x 10″ x 2″ |
| Shipping Weight |
3.0 lb |
| 7″ No-Spin Edger (5/8-11 Standard) |
| Part # |
7139-NSE-17 |
| Includes |
One 7″ rigid aluminum backer with bearing disk and rubber bumper; standard threads |
| Product Dimensions |
7.15″ outside diameter, 0.80″ thick, 5/8-11 standard female threads |
| 7″ No-Spin Edger (M14 Metric) |
| Part # |
7139-NSEM-17 |
| Includes |
One 7″ rigid aluminum backer with bearing disk and rubber bumper; metric threads |
| Product Dimensions |
7.15″ outside diameter, 0.80″ thick, M14 x 2.0 metric female threads |
Reviews
There are no reviews yet.